How do you install toe kick molding?

Click to rate this post!
[Total: 0 Average: 0]

Here’s the basic steps to installing toe kick:
  1. Step 1: Installing toe kick longest piece first.
  2. Step 2: Cut the toe kick to length.
  3. Step 3: Rough fit the kick.
  4. Step 4: Installing the kick to the cabinet.
  5. Step 5: Hide nail holes with Color Putty.

how do you attach a toe kick?

Nail the toe kick board to the base cabinets with finishing nails. Position a nail setter on the head of each finishing nail. Strike the nail setter with the hammer to countersink each finishing nail. Fill each countersunk hole with wood putty that matches the color of your cabinet finish.

what is the standard toe kick height and depth?

The average toe kick height measures 3.5-inches and the average, as well as ideal, toe kick depth measures 3-inches.

what is standard for toe kick on kitchen cabinets?

The optimal height for a toe kick is 3 1/2 inches, and heights up to 4 inches are common. Increasing the height over 3 1/2 inches does not hurt the effectiveness of the toe kick, but it may very slightly reduce the space in your base cabinet.

What is the purpose of a toe kick?

A toe kick is the area between the base cabinet and the floor. It is also referred to as the toe space. A toe kick is the recessed area at the bottom of a base cabinet. Toe kicks are built into bathroom vanities and kitchen cabinets to allow homeowners to be more comfortable as they are working on the counter-top.

What is a toe kick on a vanity?

Toe Kick and Base Options. Our Toe Kick bases come in three varieties: Finished (recessed), Flush, and Valence (open). Finished is great for kitchens and bath vanities, and allows your foot to rest underneath the cabinets for when you are standing close.

Do kitchen islands have toe kicks?

Portable islands can move about, whereas floating islands are stationary, but appear to have no legs. Others limit the term to cabinetry with a deep toe kick area, while some simply contrast the finish of the pedestal portion with the main cabinets to give a floating effect.

Are toe kicks necessary?

The toe kick is typically only 3 inches deep and about 3 1/2 inches high, yet it makes a huge difference in the comfort of using your countertop. Although toe kicks are not required by building codes, they are a traditional design standard followed by manufacturers and tradesmen.

What color should toe kick be?

But the toe kick can be more than just a practical thing. In most kitchens the toe kick is either painted black or the same color as the cabinets, to make it as inconspicuous as possible.

How do you install a kick plate?

Hold the kick plate in position and insert screws into the top and bottom holes at the center of the plate. Tighten the screws securely. Install the remainder of the screws, working out toward either edge of the plate. This procedure helps prevent warping of the plate so that it will install flat against the door.

How do you make a toe kick for wall cabinets?

Add the kick facing Once the cabinets are installed and the floor is finished, you can add the pre-finished 1/4″ plywood kick facing. Measure the kick height at each end of the cabinet run and mark a cutline near the bottom edge. Subtract 1/8″ to give some working space at the top.