How do you remove a Moen hose weight?

Click to rate this post!
[Total: 0 Average: 0]

Moen faucet weights have clips. Push up on the clip to snap the hinge and then slide the weight to the ideal location. If you have a model with screws, use a Phillips screwdriver to loosen (not remove!) the screws just enough to let you slide the weight.

where do you put the weight on a faucet hose?

To find the correct location for the weight for your faucet, locate the lowest point on the spray hose. The correct location for the weight is between the spray head and the lowest point of the spray hose. Install the weight a few inches above the lowest point of the spray hose.

how do you remove a Moen quick connect sprayer hose?

Disconnecting a Duralock Fitting Push the hose gently into the Duralock connector and then push the black button. While holding this black button pull the hose end out of the Duralock fitting.

does Home Depot carry Moen?

MOEN – Kitchen Faucets – Kitchen – The Home Depot.

Where is the model number on a Moen faucet?

The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

How does a pull out faucet work?

While they both integrate the high-pressure sprayer into the faucet itself, as opposed to having a separate sprayer on the side of the sink, a pull-down faucet features a tall faucet head/sprayer (usually with a shorter hose, but not always) that pulls straight down into the sink.