The electronic power steering (EPS) Warning Light is located on the instrument panel. This light illuminates when the EPS is malfunctioning. When this light is lit, your steering may be a little heavier, and you should schedule an inspection as soon as possible.
Read complete answer here. Moreover, what does EPS light mean on a Hyundai Elantra?
Electronic power steering
Likewise, can you drive a car with the EPS light on? For cars with electric power steering, the light may say EPS, for electric power steering. Either way, the warning light will be yellow or red in color. You will still be able to drive, but the steering wheel will be very difficult to turn, so you will need to be extra careful when driving.
In this regard, what does it mean when your car says EPS?
The electric power steering system (EPS) Warning Light is located on the instrument panel. When the light is illuminated, it means that the EPS system is not functioning properly, and the vehicle should be serviced. Tip Like all warning lights, the EPS warning light briefly illuminates when the car is turned on.
Can a bad battery cause electric power steering problems?
You could pin power steering problems on a bad battery only if the battery is bad enough that it overworks the charging system — causing the alternator to fail, which, in turn, overworks the belt that powers both the power steering pump and the alternator, causing the belt to fail.
Is it safe to drive without EPS?
While it is technically possible to drive the car with a failing electric power steering system, it is not going to get any better. The vehicle will need to be serviced as soon as possible. The module is still pulling excess power from the battery and robbing the rest of the vehicle.
What causes the EPS light to come on?
The EPS light comes on when the computer detects an issue with the vehicle’s electronic power steering system. If the computer detects an issue with the system it will set off the warning light to notify the driver of One common problem with your vehicle is a faulty power steering control module (PSCM).
How do I reset my EPS light?
Turn ignition switch OFF, and turn ignition switch ON. The EPS indicator comes on for about 6 seconds. Within 4 seconds of turning the switch ON, while the EPS indicator is on, turn the steering wheel 45° to left from straight ahead driving position, and hold steering wheel in position until EPS indicator goes off.
Where is the EPS steering sensor located?
The power steering ECU is located behind the dash, above the steering column assembly. The steering motor assembly is located on the forward end of the steering column assembly. The EPS fuse is located in the engine room relay box.
What do Hyundai warning lights mean?
Hyundai engine oil pressure warning light. Hyundai low tyre pressure warning light. Hyundai charging system warning light. Hyundai anti-lock brake system (ABS) warning light. Hyundai electronic stability control (ESC) warning light.
What does EPS stand for?
What does the exclamation mark mean on Hyundai Elantra?
Low Tire Pressure Indicator: When the pressure in one or more tires is low, you’ll see an exclamation point inside a tire shape light up. If the pressure is fine when manually checked, there’s an issue with the tire pressure monitoring system.
Does electric power steering make noise?
Your power steering pump draws fluid in from that reservoir and if there is a low fluid level it can also draw air in along with it causing the same bubbles and whining sound.
Can a low battery affect power steering?
Can a faulty battery cause loss of power steering at low speeds? The power steering is an electrical system, so a problem with the battery could affect the power assistance. You should still be able to steer the car even without power assistance. It won’t affect the braking.
Can a steering rack be repaired?
Generally the steering rack is not repaired in fact it may not be repairable. Whether it is or isn’t, shops will simply replace it with a new (or possibly rebuilt unit).
What causes electric power steering failure?
Since your power steering pump is a simple machine, the most common cause of failure for a power steering pump is the bearing going bad. When they get very worn, they can cause leakage around the pump shaft behind the pulley and even allow the pulley to wobble.
How do you replace a steering rack?
- Put the wheels in a straight-ahead position.
- Crack loose all the wheel lug nuts.
- Raise and support the vehicle with approved jack stands.
- Remove both front wheels.
- Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly.
- Detach the outer tie rod ends.