What is DeWalt site pro modular guarding system?

Click to rate this post!
[Total: 0 Average: 0]

What is the site pro modular guarding system? From DeWalt site: SitePro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application. Basically, fancy name for plastic blade guard.

can Dewalt dwe7480 use dado blades?

According to the dewalt website the DWE7480 doesn’t support dado blades. The result is a slightly smaller assembly and the flange can‘t be removed, so no 13/16 dados. That said it looks 3/8 dado would be totally fine.

what is the difference between dwe7480 and dw745?

The feature that differentiates both models is the overall performance. The motor of the DWE7480 can rotate at 4,800 rpm while DW745 can only get to 3,800 rpm. Although both models have a 15-amp 1850-Watt motor, the fact that the DWE7480 can rotate faster means that it will give you a cleaner cut.

can I use a dado blade on my Dewalt table saw?

The DEWALT DW7444 is ideal for safely using dado blades with your DEWALT table saw.

Can all table saws use dado blades?

Many table saws accept dado blades with a maximum width of 13/16 inches. Dust port: Table saws produce a lot of sawdust, but table saws with cabinets keep dust fairly well-contained. On all types of table saws, look for a dust port if you want to connect to a dust collection system as you cut.

Why are dado blades illegal in Europe?

As already mentioned dado blades are illegal on UK (EU) table saws because in order to use them the guard and riving knife have to be removed, and is therefore unsafe. This is not the case in the USA. Because of this, all UK or european table saws are deliberatley fitted with short arbors to prevent their use.

How do you assemble a table saw?

As always refer to your saw’s manufacturer manual for explicit directions on assembling your saw. Secure Your Saw. Remove the Throat Plate. Install the Blade. Install the Riving Knife. Attach the Anti-Kickback Device. Attach the Blade Guard Assembly. Install the Throat Plate. Locate the Fence.

How do you take the riving knife off a Dewalt table saw?

I guess the way to remove the riving knife is to push a very thin metal strip on the side of the riving knife that’s near the motor. That will push the latching mechanism in and the tiny peg will be out of the hole. Then you can pull the riving knife up.