What is flash curing?

Click to rate this post!
[Total: 0 Average: 0]

Flash curing is when you incorporate a heating source into the inline printing process. The flash is not intended to fully cure the ink but to just make it “dry to the touch,” so that other colors can then be printed on top to make them brighter.

what does flash cure mean?

Flash Curing allows one or more colours in a design to be touch dried prior to the subsequent colour being printed; these colours are said to have been ‘Flash Cured‘. Flash Cure printing on textiles takes advantage of the two-stage curing of plastisol inks.

how long do you flash dry a shirt?

Flash or Spot Cure Drying Set the flash cure heater to the highest temperature and placed heating element 3 inches over the garment for 25 – 35 seconds (generally speaking).

what is a flash dryer used for?

The flash dryer is a very important part of the screen printing process. A flash dryer is used in screen printing in one of two ways. In a production setting, a screen printing flash dryer is used to set or gel the ink in order to print another color beside or on top of it.

Can you cure plastisol ink with a flash dryer?

yes, you can cure plastisol inks with a flash dryer. If you have an infrared temp gun, use is to make sure the ink is all at the curing temperature plus some to make sure the heat gets all the way through the ink.

How long does it take for plastisol ink to cure?

one minute

Can you cure plastisol ink with a heat press?

Plastisol Inks It’s thicker than water-based inks. Drying Info: Heat to 320ºF to cure it. You can use a heat gun to dry it. If using a heat press, cover the print with a teflon sheet before pressing, and wait for it to cool before peeling the teflon off of the print.

How does a flash dryer work?

Flash Drying Process Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters.

Can you cure a shirt with a flash dryer?

Curing with a Flash Dryer In order to cure a t-shirt with a flash dryer, you will want to pull your shirt off of the press platen after printing so it is not secured with the adhesive. Leaving the shirt adhered to the platen causes issues with letting the heat penetrate the garment.